|
STM32L4xx_HAL_Driver
1.14.0
|
SMBUS Configuration Structure definition. More...
Data Structures | |
| struct | SMBUS_InitTypeDef |
SMBUS Configuration Structure definition.
| struct SMBUS_InitTypeDef |
Definition at line 48 of file stm32l4xx_hal_smbus.h.
| Data Fields | ||
|---|---|---|
| uint32_t | AddressingMode |
Specifies if 7-bit or 10-bit addressing mode for master is selected. This parameter can be a value of SMBUS addressing mode |
| uint32_t | AnalogFilter |
Specifies if Analog Filter is enable or not. This parameter can be a value of SMBUS Analog Filter |
| uint32_t | DualAddressMode |
Specifies if dual addressing mode is selected. This parameter can be a value of SMBUS dual addressing mode |
| uint32_t | GeneralCallMode |
Specifies if general call mode is selected. This parameter can be a value of SMBUS general call addressing mode. |
| uint32_t | NoStretchMode |
Specifies if nostretch mode is selected. This parameter can be a value of SMBUS nostretch mode |
| uint32_t | OwnAddress1 |
Specifies the first device own address. This parameter can be a 7-bit or 10-bit address. |
| uint32_t | OwnAddress2 |
Specifies the second device own address if dual addressing mode is selected This parameter can be a 7-bit address. |
| uint32_t | OwnAddress2Masks |
Specifies the acknoledge mask address second device own address if dual addressing mode is selected This parameter can be a value of SMBUS ownaddress2 masks. |
| uint32_t | PacketErrorCheckMode |
Specifies if Packet Error Check mode is selected. This parameter can be a value of SMBUS packet error check mode |
| uint32_t | PeripheralMode |
Specifies which mode of Periphal is selected. This parameter can be a value of SMBUS peripheral mode |
| uint32_t | SMBusTimeout |
Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value. (Enable bits and different timeout values) This parameter calculated by referring to SMBUS initialization section in Reference manual |
| uint32_t | Timing |
Specifies the SMBUS_TIMINGR_register value. This parameter calculated by referring to SMBUS initialization section in Reference manual |